CUTEK EXTREME CD50

Name: CUTEK EXTREME CD50
Brand: Cutek

$0.00

CUTEK Extreme CD50 is a high-performance oil-based wood stabiliser that highlights the natural beauty of wood and extends service life.

CUTEK Extreme CD50 penetrates deeply into wood to control moisture, and minimise warping, cupping and splitting. Protecting from the inside out, CUTEK Extreme CD50 will not flake or peel and maintenance is fast and simple – no need to sand or strip.

Extreme CD50 is made for Australian conditions and enhances the natural beauty, grain and texture of timber. Applied as a clear oil, CUTEK Extreme CD50 will allow timber to naturally silver over time. It may also be mixed with any of the 16 colourtones to enhance and maintain the freshly oiled natural look of your timber.

Decking, Cladding, Fences, Exterior timber, Exterior Timber Furniture
New Wood

Your timber must be bare, clean and dry before applying CUTEK Extreme CD50. If your timber presents with surface contaminants such as stains caused by water, iron or tannins, we recommend using CUTEK Restore prior to application of CUTEK Extreme CD50.

IMPORTANT: The best method to follow is to apply CUTEK Extreme CD50 is as thin as possible on the hottest day as possible. Two or three very thin coats of Extreme CD50 will be much more beneficial for your timber over the long term rather than applying one or two heavy coats.
CUTEK Extreme CD50 should be reapplied when the wood is no longer beading water, or as frequently as necessary to retain the natural beauty and colour of the wood.

Typically, horizontal exterior wood surfaces exposed to full weather such as pool decks and handrails will require re-coating more frequently (initially after 6 months, then annually), while other surfaces such as vertical rough-sawn cladding will need recoating less often.
Stabilises your wood - reducing splitting, warping and cupping with a self-healing action

Simple and easy to use

Maintenance is fast and simple - No need to sand or strip,

just simply clean and recoat

No flaking or peeling - Instead, the coating is designed to fade with time

Cost effective - Up to 2x the coverage rate of most wood coatings

Your timber is the star! - Enhances the natural colour and grain of your timber

Sustainable choice - Significantly extends the service life of timber

Apply before or after install – no waiting for wood to weather and moisture won’t enter through cuts or fasteners

Suitable for all types of wood - including engineered wood and some bamboo.
These figures represent typical averages for common decking and cladding species and are to be used as a guideline only.

New hardwoods dressed - 10–20m2/litre

Old restored timber dressed - 7–9m2/litre

New timber rough sawn - 7–9m2/litre

Old restored timber rough sawn - 4–7m2/litre

Shingles and shakes - 2–5m2/litre

GET IN TOUCH...

CUTEK EXTREME CD50

Recommended Uses

Directions For Use

Maintenance

Key product information

Downloads

Size

Coverage

TIMBER SPECIES

FIXINGS & FINISHES

DECKING CONSTRUCTION SCREW - FLAT HEAD 50mm

CUTEK EXTREME CD50

AUSSIE CLEAR LIGHT

CLADDING SCREW - SMALL HEAD 50MM

DECKING CONSTRUCTION SCREW - DOME HEAD 50MM

TIMBER TO METAL WING TIP SCREW - 38mm

BLACK CONSTRUCTION SCREW - DOME HEAD 50MM

GREY DECK CLEANER - OXALIC ACID

CONTROLLED EROSION STAIN

CONTACT

Contact Us

Warehouse